Introduction
This write up will show how to remove the 2 under trays on a Subaru BRZ or Scion FR-S. These under trays are always in the way of the exhaust installs and so on. This will guide you to the easy steps sof taking off the stock under trays.
Parts
No parts specified.
-
-
There are various bolts on the back under tray that need to be taken off with a 10mm socket
-
There are 11 Bolts that have to be taken off to remove the black under tray.
-
-
-
After getting the rear under tray off, its time to move on to the front under tray.
-
Theres 7 black clips that require a flat head to pop out. Be careful not to break the head on these. Once they pop out, just pull them out of the hole.
-
After the Clips are out, go ahead and use the 10mm socket to get the bolts out. There should be (8) 10 mm head bolts holding up the under tray.
-
A lot of the work that usually needs to be done on the car will require the under tray to come off. This is usually the first step of any modding process. Happy Modding!
A lot of the work that usually needs to be done on the car will require the under tray to come off. This is usually the first step of any modding process. Happy Modding!
Cancel: I did not complete this guide.
One other person completed this guide.
