Introduction

A quick and detailed how to on how to install window visors on a 2015 Subaru STi with Pictures!

Parts

No parts specified.

  1. Before installing the window visors, the first step would be to clean the car, or at least the area where the visors are going to stick on. Then before ripping off the cover for the double sided tape, go ahead and stick those small clips on each of the visor. 2 for each visor will be proper. Then before ripping off the cover for the double sided tape, go ahead and stick those small clips on each of the visor. 2 for each visor will be proper.
    • Before installing the window visors, the first step would be to clean the car, or at least the area where the visors are going to stick on.

    • Then before ripping off the cover for the double sided tape, go ahead and stick those small clips on each of the visor. 2 for each visor will be proper.

  2. After the clips are installed, line up the visors on the doors and lower the windows. The clips go between the window seal and the door frame. The clips go between the window seal and the door frame.
    • After the clips are installed, line up the visors on the doors and lower the windows.

    • The clips go between the window seal and the door frame.

  3. After making sure the clips are in and fastened and the visors are lined up properly, use a pick to remove the tape backing from the visor. Removal of the tape backing officially installs the visors on the vehicle. Removal of the tape backing officially installs the visors on the vehicle.
    • After making sure the clips are in and fastened and the visors are lined up properly, use a pick to remove the tape backing from the visor.

    • Removal of the tape backing officially installs the visors on the vehicle.

  4. After all the tape backing is removed, it is now time to press the visors onto the car to make sure that the tape sticks permanently. After all the tape backing is removed, it is now time to press the visors onto the car to make sure that the tape sticks permanently.
    • After all the tape backing is removed, it is now time to press the visors onto the car to make sure that the tape sticks permanently.

  5. Once all four visors are pressed on, proceed to enjoy the view of these visors. Once all four visors are pressed on, proceed to enjoy the view of these visors.
    • Once all four visors are pressed on, proceed to enjoy the view of these visors.

Conclusion

A wonderful and stylish addition to your Subaru STi. Also helps a lot while driving. You are now able to drive with the windows cracked if it is raining.

Bench Espiritu

Member since: 05/02/2014

2,060 Reputation

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 641

Copyright© 2019 Moddit