How to Install Window Visors on a 2015 Subaru WRX STi

Before installing the window visors, the first step would be to clean the car, or at least the area where the visors are going to stick on.

Then before ripping off the cover for the double sided tape, go ahead and stick those small clips on each of the visor. 2 for each visor will be proper.

After the clips are installed, line up the visors on the doors and lower the windows.

The clips go between the window seal and the door frame.

After making sure the clips are in and fastened and the visors are lined up properly, use a pick to remove the tape backing from the visor.

Removal of the tape backing officially installs the visors on the vehicle.

After all the tape backing is removed, it is now time to press the visors onto the car to make sure that the tape sticks permanently.

Once all four visors are pressed on, proceed to enjoy the view of these visors.