Introduction
This guide will show you how to measure the clearance for SR20DET valve guides.
-
-
Install the valve guide in the cylinder head.
-
Measure the gap between the valve stem to valve guide.
-
The required gap is listed below.
-
Make sure the necessary adjustments to meet this specification
-
Intake side: 0.03mm to 0.04mm
-
Exhaust side: 0.04mm to 0.05mm
-
Almost done!
Finish Line
One Comment
A very educative article indeed!
Having the right part for your vehicle is very important and If you are looking for cylinder heads at a reasonable price head over to Allied Motor Parts: https://www.alliedmotorparts.com/collect...
