Skip to main content

Introduction

This guide will show you how to measure the clearance for SR20DET valve guides.

  1. Install the valve guide in the cylinder head. Measure the gap between the valve stem to valve guide. The required gap is listed below.
    • Install the valve guide in the cylinder head.

    • Measure the gap between the valve stem to valve guide.

    • The required gap is listed below.

    • Make sure the necessary adjustments to meet this specification

    • Intake side: 0.03mm to 0.04mm

    • Exhaust side: 0.04mm to 0.05mm

Finish Line

Dung Nguyen

Member since: 03/27/2013

842 Reputation

49 Guides authored

One Comment

A very educative article indeed!

Having the right part for your vehicle is very important and If you are looking for cylinder heads at a reasonable price head over to Allied Motor Parts: https://www.alliedmotorparts.com/collect...

Benedict Pierce - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 807

Copyright© 2019 Moddit